Napoleon LVX38N Installation Manual

Also see for LVX38N: Installation manual Installation manual

Contents

Napoleon LVX38N Installation Manual Manual pdf 37 page image

ENW415-1710 / A / 07.27.1737venting installationThe vent shield is telescopic and must be adjusted to shield the first 30” of vertical vent always used.FOR SEE-THRU APPLIANCES, REPEAT STEPS WITH THE OPPOSITE SIDE (2 vent shields required)Fig. 1 Fig. 2 Fig. 31. Loosen the fasteners on the vent shield assembly. DO NOT DISCARD FASTENERS (Figure 1).2. Adjust vent shield to its maximum vertical (Figure 2).3. Tighten the fasteners to lock the vent shield height (Figure 3).4. Remove the fasteners as shown in Figure 4. DO NOT DISCARD FASTENERS5. Align the vent shield with the holes and replace above screws (Figure 5).6. Secure the vent shield with two fasteners (supplied) to the front upper frame (Figure 6).note:6.6 vent shield installationFig. 4 Fig. 5 Fig. 6SEE-THRU EXAMPLEType 1 (x2)