Napoleon LVX38N Installation Manual

Also see for LVX38N: Installation manual Installation manual

Contents

Napoleon LVX38N Installation Manual Manual pdf 51 page image

ENW415-1710 / A / 07.27.1751finishing• Risk of fire!• Never obstruct the front opening of the appliance.• The front of the appliance must be finished with any non-combustible materials such as brick, marble, granite,etc., provided that these materials do not go below the specified dimension, as illustrated.• Do not strike, slam, or scratch. Do not operate appliance with glass removed, cracked, or scratched.• Facing and/or finishing material must never overhang into the appliance opening.• The glass door assembly is a safety device designed to pivot forward when relieving excess pressure that mightoccur. Finishing or other materials must not be located in the opening surrounding the door as this will interferewith the doors ability to relieve pressure.12.0 finishing! WARNING12.1 fastener placement restriction1 1/2”8”2”Gas ValveNo fasteners permitted with greater than 3/4”penetration into appliance.No fasteners permitted.When securing non-combustibles, we suggest using high temperature construction adhesive within 2” (5.08cm)above and to the sides from the appliance opening and 8” (20.3cm) below the appliance opening. DO NOTSCREW IN THE RESTRICTED AREA AS THIS COULD DAMAGE THE INTERNAL COMPONENTS OF THEAPPLIANCE THAT CAN CAUSE INJURY OR DEATH.This applies to both single-sided and see-thru appliances.Maximum screw length to be used outside the restricted screw area is 3/4” greater than finishing materialthickness.(i.e. no fastener permitted that penetrates the appliance more than 3/4”6”