Napoleon LVX38N Installation Manual

Also see for LVX38N: Installation manual Installation manual

Contents

Napoleon LVX38N Installation Manual Manual pdf 7 page image

ENW415-1710 / A / 07.27.177general information141013 6589 4 32GLASS GUARD1.2 installation overviewRecommended installation steps:1. Determine venting requirements before deciding the final location of the appliance2. Plan out appliance enclosure, framing, fronts, accessories, etc.3. Install rough framing (refer to “rough framing” section)4. Place the appliance in its final position5. Install nailing tabs (refer to “nailing tab installation” section)6. Install appliance venting (refer to “venting installation” section)7. Install vent shield (refer to “vent shield installation” section)8. Install all electrical wirings (refer to “electrical information” section)9. Install gas lines (refer to “gas installation” section)10. Fit glass guard (refer to “glass guard assembly installation / removal” section)11. Test appliance (Glass Guard must be installed while testing the appliance)12. Remove and protect glass guard. Take great care to store using original packaging.13. Complete framing (refer to “finish framing” section)14. Finishing (refer to “finishing” section)15. If necessary, do final adjustments to glass guard.16. Complete installation checklist in the owner’s manual and apply the serial number to owner’s manual