Napoleon LVX38N Installation Manual

Also see for LVX38N: Installation manual Installation manual

Contents

Napoleon LVX38N Installation Manual Manual pdf 63 page image

ENW415-1710 / A / 07.27.1763finishingEvenly spread the glass media onto the media tray. Ensure no glass media falls into the pilot opening. If thishappens, insert a clean bag into your vacuum cleaner and vacuum out the glass media.Replacement glass can be purchased from your local dealer / distributor.Cleaning Glass MediaGlass media may have a fine oil residue that needs to be cleaned prior to installation. Clean the glass with milddish soap, drain, rinse thoroughly and dry before placing over the burner.Removing MediaUsing a vacuum cleaner, use a clean bag and vacuum out the glass media.12.7 glass media installation / removal12.8 optional media placementTo install optional media, refer to instruction leaflet included with the media kit.! WARNING• Clean the glass media prior to installation. Before applying the cleaned glass, ensure that it is dry.• If replacing, use only the replacement glass media available from your local authorized dealer / distributor.• Glass media over the burner ports will cause flame lifting and sooting problems.• Do not place any media (glass or vermiculite) in or around the pilot opening and/or on the burner ports. Thiswill interfere with the pilot operation.Do not use more media than what was supplied.Do not place media directly onto the burner.note:Pilot Area