8-23Setup Menus7. In the New Connection dialog box, select the host to connect to in the ConnectTo list box.8. Click the Connect button. TeemTalk will attempt to connect to the host. If this isunsuccessful it will display an error message (see below). All the informationentered in the SSL Connection dialog box is stored in the .nv file on a per sessionbasis. If the user selects the Save Password option then the Client Certificatepassword will be stored in an encrypted form.Error MessagesCould not connect TCP/IP socket.The most likely causes of this error are that the service is not running on the serveror the port number is incorrect.Could not connect SSL socket. Please check that your client certificate is correct.This message is returned if the server refuses the SSL connection. The most likelycauses are that the server is expecting a client certificate but none has beenspecified or the client certificate specified is invalid for some reason. This errormay also be seen if the server is running an incompatible version of SSL.TeemTalk currently supports SSL2, SSL3 and TLS.The server’s certificate cannot be verified.The server’s identity certificate was not signed by any of the root certificatesinstalled in TeemTalk. TeemTalk will not connect to a host it cannot verify.Common name does not match host name.The common name is part of the server’s certificate. SSL assumes this will matchthe host name given in the Connect To box in the New Connection dialog box. Ifthey do not match TeemTalk will not connect to the host.
