262IPMaps Settingsset ip-maps name <name> internal-ip <ip address>Specifies the name and static ip address of the LAN device to be mapped.set ip-maps name <name> external-ip <ip address>Specifies the name and static ip address of the WAN device to be mapped.Up to 8 mapped static IP addresses are supported.Network Address Translation (NAT) Default SettingsNAT default settings let you specify whether you want your Netopia Gateway to forward NATtraffic to a default server when it doesn’t know what else to do with it. The NAT default hostfunction is useful in situations where you cannot create a specific NAT pinhole for a trafficstream because you cannot anticipate what port number an application might use. Forexample, some network games select arbitrary port numbers when a connection is beingopened. By identifying your computer (or another host on your network) as a NAT defaultserver, you can specify that NAT traffic that would otherwise be discarded by the NetopiaGateway should be directed to a specific hosts.set nat-default mode [ off | default-server | ip-passthrough ]Specifies whether you want your Netopia Gateway to forward unsolicited traffic from theWAN to a default server or an IP passthrough host when it doesn’t know what else to dowith it. See “Default Server” on page 85 for more information.set nat-default dhcp-enable [ on | off ]Allows the IP passthrough host to acquire its IP address via DHCP, if ip-passthrough isenabled.set nat-default addressip_addressSpecifies the IP address of the NAT default server.
