278set security state-insp xposed-addrexposed-address# "n" start-port [ 1 - 65535 ]set security state-insp xposed-addrexposed-address# "n" end-port [ 1 - 65535 ]Packet Filtering SettingsPacket Filtering settings are supported beginning with Firmware Version 7.4.Packet Filtering has two parts:• Create/Edit/Delete Filter Sets, create/edit/delete rules to a Filter Set.• Associate a created Filter Set with a WAN or LAN interfaceSee “Packet Filter” on page 154 for more information.set security pkt-filter filtersetfilterset-name [ in | out ]indexforward [ on | off ]Creates or edits a filter rule, specifying whether packets will be forwarded or not.☛ NOTE:If this is the first rule, it will create the filter-set called filterset-name, other-wise it will edit the filterset.If the index is not consecutive, the system will select the next consecutiveindex. If the index does not exist, a rule will be created. If a rule exists, therule will be edited.set security pkt-filter filtersetfilterset-name [ in | out ]indexidle-reset [ on | off ]Turns idle reset on or off for the specified filter rule. A match on this rule resets idle-time-out status and keeps the WAN connection alive. The default is off.
