95ConfigureLink: SNMPWhen you click theSNMP link, the SNMP configuration page appears.The Simple Network Management Protocol (SNMP) lets a network administrator monitorproblems on a network by retrieving settings on remote network devices. The networkadministrator typically runs an SNMP management station program on a local host toobtain information from an SNMP agent. In this case, the Netopia Gateway is an SNMPagent. Your Gateway supports SNMP-V1, with the exception of most sets (read-only andtraps), and SNMP-V2. (For certain parts of the NPAV2TRAP.MIB – parameters under resNat-Params, resDslParams, resSecParams – set is supported.)You enter SNMP configuration information on this page. Your network administrator fur-nishes the SNMP parameters.
