Monitoring Tools 9-3Current StatusThe current status section is a table showing the current status ofISDN, the WAN, or Frame Relay.Current ISDN Connection or WAN StatusISDN only Current ISDN Connection Status---Profile Name------State---%Use-Remote Address----Est.-More Info----------ISP CH1 10 IP 92.163.4.1 Lcl NAT 192.163.100.6Leased line with PPP orHDLC enabled onlyCurrent WAN Status---Profile Name------State---%Use-Remote Address----Est.-More Info----------ISP CH1 10 IP 92.163.4.1 Lcl NAT 192.163.100.6Profile Name: Lists the name of the connection profile being used,if any. This field will also indicate if the B-channel is in use for aPOTS call.State: Lists the channels in use for this connection.%Use: Indicates the average percent utilization of the maximumcapacity of the channels in use for the connection.Remote Address: Shows the IP address of the connected remotenetwork if the connection is using IP. Otherwise, shows the IPXaddress of the connected remote network, if using IPX. For ISDNPOTS calls, it shows the called DN if locally originated, otherwisethe calling DN (if available).Est: Indicates whether the connection was locally or remotelyestablished.More Info: Indicates, in order of priority, the NAT address in use forthis connection, the IPX address in use (if IP is also in use), or theISDN caller identification (if available).
