9-4 Reference GuideCurrent Frame Relay StatusLeased line with FrameRelay enabled only Current Frame Relay Status----DLCIs In Use----Bytes Rx----Bytes Tx----Frames Rx----Frames Tx----FECNs+BECNs--0 0 0 0 0 0DLCIs In Use: Indicates the number of data link connectionidentifiers currently in use.Bytes Rx: Indicates the total number of bytes received on the WANlink.Bytes Tx: Indicates the total number of bytes sent on the WAN link.Frames Rx: Indicates the total number of frames received on theWAN link.Frames Tx: Indicates the total number of frames sent on the WANlink.FECNs+BECNs: Indicates congestion of frames. The forward explicitcongestion notification (FECN) indicates too much data at too high aspeed is being received. The backward explicit congestionnotification (FECN) indicates too much data at too high a speed isbeing sent.LED StatusThis section shows the current real-time status of the NetopiaRouter’s LEDs. It is useful for remotely monitoring the router’sstatus. The Quick View screen’s arrangement of LEDs correspondsto the physical arrangement of LEDs on the router.All interfaces LED Status-----ETHERNET------+--CH1-----MGMT----CH2---+-CARD-+-PWR +-------LEDS--------LNK LNK TX COL AUI RX LNK RDY TX RX LNK |'-'= Off 'E'= Error- - - - - - - - - - - - O |'O' = On '*'= Blink
