TroubleshootingTechnical Notes and IndexF12The saved images are notdisplayed in auto sortmode.• The desired image was sorted to a categoryother than the category currently displayed.• Images saved by a camera other than theCOOLPIX S6300 and images copied using theCopy option cannot be displayed in auto sortmode.• Images saved in the internal memory or on thememory card may not be played back correctlyif overwritten by a computer.• Up to 999 images and movies in total can beadded to each category. If the desired categoryalready contains 999 images or movies in total,new images or movies cannot be added.78, E1078, E10–78, E10Nikon Transfer 2 does notstart when camera isconnected.• Camera is off.• Battery is exhausted.• USB cable is not correctly connected.• Camera is not recognized by the computer.• Confirm system requirements.• Computer is not set to start Nikon Transfer 2automatically. For more information aboutNikon Transfer 2, refer to help informationcontained in ViewNX 2.232281, 84–8284The PictBridge startupscreen is not displayedwhen the camera isconnected to a printer.With some PictBridge-compatible printers, thePictBridge startup screen may not be displayedand it may be impossible to print images whenAuto is selected for the Charge by computeroption in the setup menu. Set the Charge bycomputer option to Off and reconnect thecamera to the printer.96, E80Images to be printed arenot displayed.• Memory card contains no images. Replace thememory card.• Remove the memory card to print images fromthe internal memory.• Images captured using 3D photographycannot be printed.202041Cannot select paper sizewith camera.Paper size cannot be selected from the camera inthe following situations, even when printing froma PictBridge-compatible printer. Use the printer toselect paper size.• The printer does not support the paper sizesspecified by the camera.• The printer automatically selects the paper size.81, E27,E28–Problem Cause/Solution A
