51Shooting FeaturesSpecial Effects Mode (Applying Effects When Shooting)Effects can be applied to images during shooting.* The icon of the last effect selected is displayed. The default setting is D (soft).The following six effects are available.* The h HS 120 fps (640×480) setting in Movie Options (A91) cannot be used withthis setting. If you try to use both settings at the same time, only the setting made first isenabled.• The camera focuses on the area in the center of the frame.• When Selective color is selected, rotate the multiselector or press H or I to select the desired colorfrom the slider.To change settings for any of the followingfunctions, first press the k button to cancel colorselection, then change the settings as desired.- Flash mode (A62)- Self-timer (A64)- Macro mode (A65)- Exposure compensation (A66)To return to the color selection screen, press the k button again.Enter shooting mode M A (shooting mode) button M D (third icon from the top*) MK M select an effect (A26-27)Category DescriptionD Soft*(default setting) Softens the image by adding a slight blur to the entire image.E Nostalgic sepia* Adds a sepia tone and reduces the contrast to simulate the qualitiesof an old photograph.F High-contrastmonochrome Changes the image to black and white and gives it sharp contrast.G High key Gives the entire image a bright tone.H Low key Gives the entire image a dark tone.I Selective color Creates a black and white image in which only the specified color remains.Selective colorSaveSaveSaveSlider
