Shift element downShift element up10.2.1.2.4.2 CalculationOff --- Calculated channel deactivatedTable Source Selection of the channel from which the input data is usedOpens the screen for entering the values table (the table rows are interpolatedlinearly, values outside of the defined table are extrapolated linearly.)Digital Source Selection of the channel from which the input data is usedHigh level Signal recognition level+, -, x, / Source Selection of the channel from which the input data is used+, -, x, /Source Selection of the channel from which the input data is usedDelta Source Selection of the channel from which the input data is usedTime basis Specifies the desired time unit (value/sec., value/min., ...) for the resultOffset Offset that is added following multiplication with the "Factor" parameter. Theresult is converted in to the desired time unit before multiplication with the"Factor" parameter.Factor Factor with which the result is multiplied once it has been converted into thedesired time unit. The "Offset" parameter is then added.Clone Source Selection of the channel that should be cloned104 of 141 NivuLog Easy V3 - Rev. 03 as of 24.10.2018
