Chapter 10 User interfaces10.2.1.1.8 Basic settingsConnection type Selection of the connection typeInterval The device connects in the transmission cycle.Interval & wakeup The device connects to the server in the transmission cycleand can be placed into Aloha transmission mode via theserver.online The device does not disconnect the connection andcontinuously transmits the measurement data. However,every 7 days, the connection is temporarily interrupted inorder to verify the server assignment.Operating mode Selection of the operating modenormal Operation in accordance with the configurationtransport Transport lock activated. This means that all of theoperations (measurement, recording, transmission, etc.)are stopped to minimise energy consumption duringtransport or storage.Start Aloha mode Selection of how the device should react to a wakeup via the server interface (i.e.upon receipt of a wakeup SMS)Off Only a standard connection is established.Once An Aloha transmission is executed once immediately afterthe standard connection is established. This parameter isthen set to "Off" by the device.On During the next connection, the device switches to testmode for the time specified via the "Online time"parameter. An Aloha transmission is also triggeredimmediately after the standard connection is established.Online time Duration of the Aloha connectionTransmission cycle Time between transmissionsTransmission cycle quick Time between the transmissions, if a alternative transmission cycle should beused because of a trigger being initiatedNivuLog Easy V3 - Rev. 03 as of 24.10.2018 99 of 141
