Nivus NivuLog Easy V3 User Manual
                                                                                                                                             | |
Contents
| 
10.2.1.1.7.1 BasisTitle 1-5Freely selectable channel title for the calculated channels [0-16 characters]ModePossible calculation modes for the calculated channelsOff --- Calculated channel deactivatedTable Min Defines the lower scale end of the pointer instrumentsMax Defines the upper scale end of the pointer instrumentsUnit String that is used as a measurement unit by all of the server displayelements [0-16 characters]. It has no direct influence on the valuesDecimalplacesNumber of decimal places that are used by all of the server display elementsDigital Invert Inverts the input signal+, -, x, / Min Defines the lower scale end of the pointer instrumentsMax Defines the upper scale end of the pointer instrumentsUnit String that is used as a measurement unit by all of the server displayelements [0-16 characters]. It has no direct influence on the valuesDecimalplacesNumber of decimal places that are used by all of the server display elementsDelta Determines the difference between two measurement values and divides the result by thetime difference between the time stamps of the measurement values. The time unit(value/sec., value/min., ...) for the result can be selected via the "Time basis" parameterlocated in the "Calculation" tab. It is thus possible to convert the counter reading (m3) of thesource in to a flow rate (m3/min.) (see "Additional explanation: Delta mode" on page 98).Min Defines the lower scale end of the pointer instrumentsMax Defines the upper scale end of the pointer instrumentsUnit String that is used as a measurement unit by all of the server displayelements [0-16 characters]. It has no direct influence on the valuesDecimalplacesNumber of decimal places that are used by all of the server display elementsclone Creates a clone of a measurement channel. This ensures it is possible to rename channels,to select different ends of the scale for the pointer instruments, to determine a new string asa measurement unit and to adjust the number of decimal places. The measurement values(numerical value without unit) correspond exactly to those of the source.Min Defines the lower scale end of the pointer instrumentsMax Defines the upper scale end of the pointer instrumentsUnit String that is used as a measurement unit by all of the server displayelements [0-16 characters]. It has no direct influence on the valuesDecimalplacesNumber of decimal places that are used by all of the server display elements96 of 141 NivuLog Easy V3 - Rev. 03 as of 24.10.2018 |
Related manuals for Nivus NivuLog Easy V3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine