3. Connect the antenna extension or antenna directly to the antenna connector of the NivuLog Easy V3(see "Overview" on page 22).Important note: Do not apply too much force when tightening the antenna. Do not use anytools to tighten the antenna or antenna extension; only tighten it manually.4. Switch the power supply of the NivuLog Easy V3 back on.The following step is not mandatory.5. Check whether the connection to the Device to Web server has worked correctly (see "Testingcommunication with the device" on page 71).8.6.3 Technical details about the universal inputsNote: The universal inputs are not galvanically isolated.8.6.3.1 0/4 to 20mA modeNote: Above 23,96mA, the relevant input becomes highly resistive (safety shutdown to prevent damage to theuniversal input).Resolution 6,3μAImax 23,96mALoad 96Ω8.6.3.2 0 to 2V modeResolution 610μVUmax 2,5VLoad 10k0868.6.3.3 0 to 10V modeResolution 7,97mVUmax 32VLoad 4k78.6.3.4 Standard digital modes (digital, day counter, interval counter)General Umax 32VLow <1,44VHigh >3,36VLoad 8k6day and intervalcounterMinimum pulselength1ms58 of 141 NivuLog Easy V3 - Rev. 03 as of 24.10.2018
