The following table specifies the relevant parameters for the module:Configuration section Mode Parameter ExplanationMeasurement channels ->BasisDigital --- ---Cnt.Inf.Cnt.DayCnt.Intrvl.0-20mA4-20mA0-2V0-10VTrimming Provided to adjust the zero pointSensoroffsetSpecifies the installation height of the sensor6.1.5 Decay moduleThe decay module is designed to summarise several measurement values. The average value over arequired time frame or the minimum value within a required time frame can be determined, for example. Thedecay module is only available for the 4 universal inputs, with the exception of "Cnt.Inf." and "Cnt.Day"channel modes.The following table specifies the relevant parameters for the module:Configuration section Mode Parameter ExplanationMeasurement channels ->Config.Digital Decay Temporal function in the measurement cycleQuantity Number of measurement values taken intoconsideration during the decay (max. 64). Inthis mode, a measurement value is createdupon expiry of the measurement cycle andwhen the input signal level is changed. Thechanges to the inputs are monitored at onesecond intervals.Cnt.Inf. --- ---Cnt.DayCnt.Intervl.0-20mA4-20mA0-2V0-10VDecay Temporal function in the measurement cycleQuantity Number of measurement values taken intoconsideration during the decay (max. 64).30 of 141 NivuLog Easy V3 - Rev. 03 as of 24.10.2018
