Nokia 002Q942 User Manual

Also see for 002Q942: Datasheet

Contents

Nokia 002Q942 User Manual Manual pdf 130 page image

• WEP key format — Select whether you want to enterthe WEP key data in ASCII or Hexadecimal format.• WEP key — Enter the WEP key data.802.1x security settingsSelect 802.1x as the WLAN security mode.802.1x authenticates and authorises devices to access awireless network, and prevents access if the authorisationprocess fails.Select WLAN security settings and from the following:• WPA/WPA2 — Select EAP (Extensible AuthenticationProtocol) or Pre-shared key (a secret key used fordevice identification).• EAP plug-in settings — If you selected WPA/WPA2 >EAP, select which EAP plug-ins defined in your device touse with the access point.• Pre-shared key — If you selected WPA/WPA2 > Pre-shared key, enter the shared private key that identifiesyour device to the WLAN to which you connect.WPA security settingsSelect WPA/WPA2 as the WLAN security mode.Select WLAN security settings and from the following:• WPA/WPA2 — Select EAP (Extensible AuthenticationProtocol) or Pre-shared key (a secret key used fordevice identification).• EAP plug-in settings — If you select WPA/WPA2 >EAP, select which EAP plug-ins defined in your device touse with the access point.• Pre-shared key — If you select WPA/WPA2 > Pre-shared key, enter the shared private key that identifiesyour device to the WLAN to which you connect.• WPA2 only mode — To allow both TKIP and AES(Advanced Encryption Standard) encryption, select Off.To allow AES only, select OnWireless LAN pluginsSelect Menu > Ctrl. panel > Settings and Connection >Destinations, and an access point group.The extensible authentication protocol (EAP) plug-ins areused in wireless networks to authenticate wireless devicesand authentication servers, and the different EAP plug-insmake possible the use of various EAP methods (networkservice).You can view the EAP plug-ins currently installed in yourdevice (network service).EAP plug-ins1. To define the EAP plug-in settings, select Options >New access point and define an access point that usesWLAN as a data bearer.2. Select 802.1x or WPA/WPA2 as the security mode.3. Select WLAN security settings > WPA/WPA2 >EAP > EAP plug-in settings.Use EAP plug-insTo use an EAP plug-in when you connect to a WLAN usingthe access point, select the desired plug-in and Options >Enable. The EAP plug-ins enabled for use with this access130 Settings