Nokia 002Q942 User Manual

Also see for 002Q942: Datasheet

Contents

Nokia 002Q942 User Manual Manual pdf 52 page image

must enter the correct network name (service setidentifier, SSID).If you already have the web browser running using thecurrently active WLAN connection, to return to the webbrowser, select Cont.web browsing. To end the activeconnection, select the connection and DisconnectWLAN.WLAN internet access pointsSelect Menu > Ctrl. panel and Connectivity > WirelessLAN > Options.Select from the following:• Filter WLAN networks — Filter out wireless LANs(WLANs) from the list of found networks. The selectednetworks are not displayed the next time theapplication searches for WLANs.• Details — View the details of a network shown in thelist. If you select an active connection, the connectiondetails are displayed.Operating modesThere are two operating modes in WLAN: infrastructureand ad hoc.The infrastructure operating mode allows two kinds ofcommunication: wireless devices are connected to eachother through a WLAN access point device, or wirelessdevices are connected to a wired LAN through a WLANaccess point device.In the ad hoc operating mode, devices can send andreceive data directly with each other.WLAN settingsSelectMenu > Ctrl. panel > Settings and Connection >Wireless LAN.To have an indicator displayed when there is a wirelessLAN (WLAN) available in your current location, select ShowWLAN availability > Yes.To select the interval for your device to scan for availableWLANs, and to update the indicator, select Scan fornetworks. This setting is not available unless you selectShow WLAN availability > Yes.To set the device to test the internet capability of theselected WLAN automatically, to ask for permission everytime, or to never perform the connectivity test, selectInternet connectivity test > Run automatically, Askevery time, or Never run. If you select Runautomatically or allow the test to be performed when thedevice asks for it, and the connectivity test is performedsuccessfully, the access point is saved to internetdestinations.To check the unique media access control (MAC) addressthat identifies your device, enter *#62209526# in thehome screen. The MAC address is displayed.Active data connectionsSelect Menu > Ctrl. panel > Connectivity > Conn.mgr..Select Active data connections.In the active data connections view, you can see the opendata connections:52 Connectivity