If several numbers are saved for a name, you can say alsothe name and the number type, such as mobile ortelephone.Make a video callWhen you make a video call (network service), you can seea real-time, two-way video between you and the recipientof the call. The live video image, or video image capturedby the camera in your device is shown to the video callrecipient.To be able to make a video call, you must have a USIM cardand be in the coverage of a UMTS network. For availability,pricing and subscription to video call services, contactyour network service provider.A video call can only be made between two parties. Thevideo call can be made to a compatible mobile device oran ISDN client. Video calls cannot be made while anothervoice, video, or data call is active.IconsYou are not receiving video (the recipient is notsending video or the network is not transmitting it).You have denied video sending from your device. Tosend a still image instead, select Menu > Settings andCalling > Call > Image in video call.Even if you denied video sending during a video call, thecall is still charged as a video call. Check the pricing withyour service provider.1. In the home screen, select to open the dialler, andenter the phone number.2. Select Options > Call > Video call.The secondary camera on the front is used by defaultfor video calls. Starting a video call may take a while.If the call is not successful (for example, video calls arenot supported by the network, or the receiving deviceis not compatible), you are asked if you want to try anormal call or send a message instead.The video call is active when you see two video images,and hear the sound through the loudspeaker. The callrecipient may deny video sending (indicated by ),and you only hear the voice of the caller and may seea still image or a grey screen.3. To end the video call, press the end key.During a video callTo change between showing video or hearing the voiceof the caller only, select or .To mute or unmute the microphone, select or .Do not hold the device near your ear when theloudspeaker is in use, because the volume may beextremely loud. To activate the loudspeaker, select . Ifyou have attached a compatible headset with Bluetoothconnectivity, to route the sound to the headset, selectOptions > Activate BT handsfree.To switch back to the handset, select .Make calls© 2009 Nokia. All rights reserved.30