service provider. To obtain these addresses, contactyour internet service provider.● Proxy server address — Enter the address of theproxy server.● Proxy port number — Enter the port number of theproxy server.WLAN internet access pointsSelect Menu > Settings and Connectivity >Destinations > Access point, and follow theinstructions on the screen.To edit a wireless LAN (WLAN) access point, open one ofthe access point groups and select an access point markedwith .Follow the instructions from your WLAN service provider.● WLAN network name — Select Enter manually orSearch for networks. If you select an existingnetwork, WLAN network mode and WLAN securitymode are determined by the settings of its access pointdevice.● Network status — Define whether the network nameis displayed.● WLAN network mode — Select Ad-hoc to create anad hoc network and to allow devices to send andreceive data directly; a WLAN access point device is notneeded. In an ad hoc network, all devices must use thesame WLAN network name.● WLAN security mode — Select the encryption used:WEP, 802.1x (not for ad hoc networks), or WPA/WPA2. If you select Open network, no encryption isused. The WEP, 802.1x, and WPA functions can be usedonly if the network supports them.● Homepage — Enter the web address of the startingpage.● Use access point — Select After confirmation if youwant the device to ask for confirmation before theconnection using this access point is created orAutomatically if you want the device to connect to thedestination using this access point automatically.To enter the settings for the selected security mode, selectWLAN security settings.Security settings for WEP● WEP key in use — Select the wired equivalent privacy(WEP) key number. You can create up to four WEP keys.The same settings must be entered on the WLAN accesspoint device.● Authentication type — Select Open or Shared for theauthentication type between your device and theWLAN access point device.● WEP key settings — Enter WEP encryption (lengthof the key), WEP key format (ASCII or Hexadecimal),and WEP key (the WEP key data in the selected format).Security settings for 802.1x and WPA/WPA2● WPA/WPA2 — Select the means of authentication:EAP to use an extensible authentication protocol (EAP)plug-in, or Pre-shared key to use a password.Complete the appropriate settings:Connectivity© 2009 Nokia. All rights reserved.70