To reject net calls from anonymous callers, selectAnonymous call barring > On.Send DTMF tonesYou can send dual tone multi-frequency (DTMF) tonesduring an active call to control your voice mailbox orother automated phone services.Send a DTMF tone sequence1. Make a call, and wait until the other end answers.2. Select Menu > Options > Send DTMF.3. Enter the DTMF tone sequence, or select apredefined sequence.Attach a DTMF tone sequence to a contact card1. Select Menu > Contacts. Open a contact, andselect Options > Edit > Options > Add detail >DTMF.2. Enter the tone sequence. To insert a pause of about2 seconds before or between DTMF tones, enter p.To set the device to send the DTMF tones only afteryou select Send DTMF during a call, enter w.3. Select Done.Voice mailSelect Menu > Tools > Call mailbox.When you open the Voice mail application for the firsttime, you are asked to enter the number of your voicemailbox.To call your voice mail, select Options > Call voicemailbox.If you have configured net call settings to your deviceand have an internet call mailbox, select Internet callmailbox > Options > Call voice mailbox to call it.To call your voice mail in the standby mode, press andhold 1; or press 1 and then the call key. If you havedefined an internet call mailbox, select whether youwant to call your voice mail or internet call mailbox.To change the voice mailbox number, select themailbox and Options > Change number.To change the internet call mailbox address, select themailbox and Options > Change address.Voice aidSelect Menu > Tools > Voice aid.The Voice aid application reads text on the display,allowing you to use the basic functions of your devicewithout looking at the display.To hear the entries in your contacts list, selectContacts. Do not use this option if you have more than500 contacts.To hear information on your missed and received calls,dialled numbers, and frequent calls, select Recentcalls.To listen to your voice messages, select Voicemailbox.To dial a telephone number, select Dialler.To hear the current time, select Clock > Time. To hearthe current date, select Clock > Date. 39 Business communications
