17. Virtual LANs (VLANs)MN700004 Rev 01 197Description of CommandsCommands to Display the VLAN ConfigurationFigure 17-1 summarizes the commands available for displaying the VLANs. You can use theshow command (with no arguments) in the general VLAN configuration mode or in a specificVLAN configuration mode to display the VLAN configuration. The other commandssummarized in the table are available in Privileged (Enable) mode.Table 17-1 Commands for displaying the VLANsC o m m a n d D e s c r i p t i o nshow Displays the VLAN configuration (this command is available in thegeneral VLAN configuration mode and in any specific VLANconfiguration mode).show vlan Displays the VLANs configuration.show vlan dynamic Displays the dynamic VLANs.show vlan management Displays the management VLANs.show vlanThe show vlan command, in Privileged (Enable) mode, displays information regarding theVLANs defined in the system. The command is equivalent to the show command in VLANConfiguration mode.Command Syntaxdevice-name#show vlanExampledevice-name#show vlan====================================================================Name |VTag| Tagged ports | Untagged ports--------------------+----+---------------------+--------------------default |1 | |1/1/1-1/1/2showThe show command, in Global and Specific VLAN Configuration modes, displaysinformation regarding the VLANs defined in the system. The command is equivalent to theshow vlan command in View and Privileged (Enable) mode.Command Syntaxdevice-name(config vlan)#show
