APPENDIXLoader, Sysloader and Dual BootMN700004 Rev 01 IV//////////////////////////////////////////////////////////////// //// Switch model : NOKIA ESB26 //// SW version : 3.3.0 created Oct 21 2003 - 14:59:16 //// ////////////////////////////////////////////////////////////////User Access VerificationPassword:download applicationThe download application command, in Loader mode, copies the switch’s application from asource computer to the switch’s permanent storage memory, through a console connection byX-modem transfer.When you type the download command on the console, the switch waits for a file transfer andperiodically sends NAKs (negative acknowledgments) to the console. These appear on theconsole screen as garbage characters.The transfer starts in an X-modem format.Upon completion of the transfer, the switch checks if the received file is a valid switchapplication code. If it is, the received image is stored in the internal FLASH memory.This role of the download command is to provide a rescue solution in case the switchbecomes inoperable and a new application image cannot be received by the TFTP transfer.Command SyntaxLoader>download applicationExampleLoader>download applicationXMODEM application download to flash 0XMODEM Receive: Waiting for SenderImage Size = 0xBD552 CRC Value = 0x691181F3Saving application code to FLASH bank 0....Success.Loader>manufacturing detailsThe manufacturing-details command, in Loader mode, displays manufacture details.Command SyntaxLoader>manufacturing-detailsExampleLoader>manufacturing-detailsSerial number : 13456 9Assembly No : 1234567HW revision : 123HW subrevision : 123Loader>
