20. IGMP SnoopingMN700004 Rev 01 246Exampledevice-name(config)#ip igmp snooping vlan 200ip igmp snooping vlan mrouterThe ip igmp snooping vlan mrouter command, in Global Configuration mode, adds amulticast router port (adds a static connection to a multicast router) to a specific VLAN. Toremove the multicast router port definition on the specific VLAN, use the no form of thiscommand.Command Syntaxdevice-name(config)#ip igmp snooping vlan <vlan-id> mrouter interface<UU/SS/PP>device-name(config)#no ip igmp snooping vlan <vlan-id> mrouter interface<UU/SS/PP>Argument Descriptionvlan-id the multicast router VLAN ID in the range <1-4094>UU/SS/PP The interface to the multicast router.Exampledevice-name(config)#ip igmp snooping vlan 200 mrouter interface 1/1/1ip igmp snooping vlan staticThe ip igmp snooping vlan static command, in Global Configuration mode, configures aHost or physical interface statically to join a multicast group. The no form of this commandremoves the static multicast definition.Hosts or physical interfaces normally join multicast groups dynamically, but you can alsostatically configure a host on an interface.Command Syntaxdevice-name(config)#ip igmp snooping vlan <vlan-id> static HH:HH:HH:HH:HH:HHinterface PORT-LISTdevice-name(config)#no ip igmp snooping vlan <vlan-id> staticHH:HH:HH:HH:HH:HH interface PORT-LISTArgument Descriptionvlan-id <1-4094> VLAN id valueHH:HH:HH:HH:HH:HH 6-byte hexadecimal address, should begin with 01:00:5e:
