Nokia Exx-1 series User Manual

Also see for E90-1: Quick start guide

Contents

Nokia Exx-1 series User Manual Manual pdf 19 page image

Transfer content between devicesSelect > Tools > Transfer.You can transfer content, such as contacts, from acompatible Nokia device to your Nokia ExxCommunicator using Bluetooth connectivity orinfrared. The type of content that can be transferreddepends on the device model. If the other devicesupports synchronization, you can also synchronizedata between the other device and your Nokia ExxCommunicator.If you transfer data from your previous device, thedevice may require you to insert the SIM card. YourNokia Exx Communicator does not need a SIM cardwhen transferring data.Transfer data with Bluetooth1. In the information view, select Continue.2. Select Via Bluetooth. Both devices must support theselected connection type.3. Activate Bluetooth in your other device, and selectContinue in your Nokia Exx Communicator to startsearching for devices with active Bluetoothconnectivity.4. Select Stop in your Nokia Exx Communicator after ithas found your other device.5. Select your other device from the list. You are askedto enter a passcode (1 to 16 digits) on your NokiaExx Communicator. The passcode is used only onceto confirm this connection.6. Enter the code on your Nokia Exx Communicator,and select OK. Enter the passcode on your otherdevice, and select OK. The devices are now paired.See "Pair devices" on page 58.For some phone models, the Transfer dataapplication is sent to your other device as amessage. To install Transfer data on your otherdevice, open the message, and follow theinstructions on the display.7. From your Nokia Exx Communicator, select thecontent you want to transfer from your otherdevice.Transfer data with infrared1. In the information view, select Continue.2. Select Via infrared. Both devices must support theselected connection type.3. Connect the two devices. See "Infrared" on page 60.4. From your Nokia Exx Communicator, select thecontent you want to transfer from your otherdevice, and select OK.Content is copied from the memory of the other deviceto the corresponding location in your device. Copyingtime depends on the amount of data to be transferred.You can also cancel and continue later.The necessary steps for data transfer may varydepending on your device, and whether you have 19 Transfer content between devicesfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 19 Jan 8, 2007 1:39:30 PM