Nokia Exx-1 series User Manual

Also see for E90-1: Quick start guide

Contents

Nokia Exx-1 series User Manual Manual pdf 25 page image

scroll to the desired contact, and select Call > Options >Internet call.To make a net call in the standby mode, enter the phonenumber or internet address, and press the call key.To make a net call with the cover keypad to an addressthat does not start with a digit, press any number keywhen the device is in standby mode, then press # for afew seconds to clear the display and to switch thedevice from the number mode to the letter mode. Enterthe address, and press the call key.To set net call as the preferred call type for outgoingcalls, select > Connectivity > Internet tel. >Options > Settings > Preferred call type > Internetcall. When your device is connected to a net call service,all calls are made as net calls.1-touch dialingSelect > Tools > Settings > Phone > Call > 1-touch dialing > On.1-touch dialing allows you to make a call by pressingand holding a number key in the standby mode.To assign a number key to a phone number, select >Tools > 1-touch. Scroll to the number key (2 - 9) on thedisplay, and select Options > Assign. Select the desirednumber from Contacts.To delete the phone number assigned to a number key,scroll to the 1-touch dialing key, and select Options >Remove.To modify a phone number assigned to a number key,scroll to the 1-touch dialing key, and select Options >Change.Call forward settingsSelect > Tools > Settings > Phone > Callforwarding.Forward incoming calls to your voice mailbox or toanother phone number. For details, contact your serviceprovider.Select to forward voice, data, or fax calls, and select fromthe following options:• All voice calls, All data calls, or All fax calls — Forwardall incoming voice, data, or fax calls.• If busy — Forward incoming calls when you have anactive call.• If not answered — Forward incoming calls after yourdevice rings for a specified period of time. Define thetime you let the device ring before forwarding thecall in the Delay time: field.• If out of reach — Forward calls when the device isswitched off or out of network coverage.• If not available — Activate the last three settings atthe same time. This option forwards calls if yourdevice is busy, not answered, or out of reach.To check the current forwarding status, scroll to theforwarding option, and select Options > Check status.To stop forwarding calls, scroll to the forwardingoption, and select Options > Cancel.Call restriction and call forwarding cannot be active atthe same time. 25 Telephonefile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 25 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 25 Jan 8, 2007 1:39:30 PM