Nokia Exx-1 series User Manual

Also see for E90-1: Quick start guide

Contents

Nokia Exx-1 series User Manual Manual pdf 65 page image

Set up an internet accesspoint for WLAN manually1. Select > Tools > Settings > Connection >Access points.2. Select Options > New access point. To use anexisting access point as a basis for the new one,select Use existing settings. To start with an emptyaccess point, select Use default settings.3. Define the following settings.• Connection name — Enter a descriptive name forthe connection.• Data bearer — Select Wireless LAN.• WLAN network name — To enter the service setidentifier (SSID), that is, the name that identifiesthe specific WLAN, select Enter manually. Toselect the network from the WLANs in range,select Search for networks.• Network status — Select Hidden if the networkyou are connecting to is hidden or Public if it isnot hidden.• WLAN network mode — If you selectInfrastructure, devices can communicate witheach other and with wired LAN devices througha WLAN access point. If you select Ad-hoc, devicescan send and receive data directly with eachother, and no WLAN access point is needed.• WLAN security mode — You must select the samesecurity mode that is used in the WLAN accesspoint. If you select WEP (wired equivalentprivacy), 802.1x, or WPA2 (Wi-Fi protectedaccess), you must also configure the relevantadditional settings. See the extended user guideon the web or the device help for moreinformation.• WLAN security settings — Edit the securitysettings for the selected WLAN security mode.• Homepage — Enter the web address of the pageyou want to display as the home page when youuse this access point.WLAN settingsSee "WLAN settings" on page 87.65 Wireless local area networkfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 65 Jan 8, 2007 1:39:30 PMfile:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml Page 65 Jan 8, 2007 1:39:30 PM