Camera23FCC DRAFTRecord videos1 To activate the camera, open the slide. If the camera isin the Image mode, select Video mode from the activetoolbar.2 Press the capture key to start recording. In the portraitmode, use the scroll key for recording. The red recordicon is shown and a tone sounds, indicating thatrecording has started.3 Select Stop to stop recording. The video clip isautomatically saved to the Imgs. & video folder ofGallery. See ‘Gallery’, p. 26. The maximum length of thevideo is 60 minutes (if enough memory available).To pause recording at any time, press Pause. The pauseicon ( ) blinks on the display. Video recordingautomatically stops if recording is set to pause and thereare no keypresses within a minute. Press the capture keyagain to resume recording.To zoom in or out of the subject, press the zoom key on theside of the device.To make lighting and color adjustments before recording avideo, use the scroll key to scroll through the activetoolbar. See ‘Setup settings—Adjust color and lighting’,p. 21 and ‘Scenes’, p. 21.To free memory before recording a video, select Options >Go to free memory (only available if you have backed upimages or video clips). See ‘Free memory’, p. 28.Video capture indicatorsThe video viewfinder displays the following:• The current capture mode indicator (1).• The audio mute on indicator (2).• The active toolbar (3), which you can scroll throughbefore recording to select the scene, white balance,and color tone (the toolbar is not displayed duringrecording).• The total available video recording time (4). When youare recording, the current video length indicator alsoshows the elapsed time and time remaining.• The devicememory ( ) andmemory card( ) indicators(5) show wherevideos are saved.• The video qualityindicator (6)indicateswhether thequality of the video is High, Normal, or Sharing.• The video clip file type (7).