Tools93Right selection key—Assign a shortcut to the rightselection key ( ) in the standby mode.Active standby apps.—Select the application shortcutsyou want to appear in the active standby. This setting isonly available if Active standby is on.You can also assign keypad shortcuts for the differentpresses of the scroll key. The scroll key shortcuts are notavailable if the active standby is on.Operator logo—This setting is only available if you havereceived and saved an operator logo. Select Off if you donot want the logo to be shown.DisplayLight sensor—Press or to change the light sensormode, and to brighten or darken the display.Power saver time-out—Select the time-out period afterwhich the power saver is activated.Light time-out—Select a time-out after which thebacklight of the display is switched off.Call settingsSend my caller ID—You can set your phone number to bedisplayed to (Yes) or hidden from (No) the person to whomyou are calling, or the value may be set by your networkoperator or service provider when you make a subscription(Set by network) (network service).Call waiting—If you have activated call waiting (networkservice), the network notifies you of a new incoming callwhile you have a call in progress. Set the function on(Activate) or off (Cancel), or check whether the functionis activated (Check status).Reject call with SMS—Select Yes to send a text messageto a caller informing why you could not answer the call.See ‘Answer or decline a call’, p. 66.Message text—Write a text to be sent in a text messagewhen you decline a call.Automatic redial—Select On, and your device makes amaximum of 10 attempts to connect the call after anunsuccessful call attempt. To stop automatic redialing,press .Summary after call—Activate this setting if you want thedevice to briefly display the approximate duration of thelast call.1-touch dialing—Select On, and the numbers assigned tothe 1-touch dialing keys ( - ) can be dialed bypressing and holding the key. See also ‘1-touch dial aphone number’, p. 65.