Gallery65setup wizard later, in the home network main view,select Options > Run wizard, and follow the instructionson the display.To connect a compatible PC to the home network, onthe PC, you must install the related software from theCD-ROM supplied with your device.Configure settingsTo configure the home network application, select Tools >Home netw. > Settings and from the following:Home access point—Select Always ask if you want thedevice to ask for the home access point every time youconnect to the home network, Create new to define a newaccess point that is used automatically when you useHome netw., or None. If your home network does not haveWLAN security settings enabled, you get a securitywarning. You can continue, and switch the WLAN securityon later; or cancel defining the access point, and firstswitch on the WLAN security. See Wireless LAN in "Accesspoints," p. 116.Device name— Enter a name for your device that is shownto the other compatible devices in the home network.Set sharing on and define contentSelect Tools > Home netw. > Share content.Content sharing—Allow or deny sharing media files withcompatible devices. Do not set Content sharing on beforeyou have configured all the other settings. If you setContent sharing on, the other UPnP compatible devices inthe home network can view and copy your files you haveselected for sharing in the Images & video folder.Images & video—Select media files for sharing withother devices, or view the sharing status of Images &video. To update the content of the folder, selectOptions > Refresh content.View and share media filesIf Content sharing is on in your device, the other UPnPcompatible devices in the home network can view andcopy the media files you have selected to share in Sharecontent. If you do not want the other devices to accessyour files, set Content sharing off. Even if Contentsharing is off in your device, you can still view and copythe media files stored in another home network device if itis allowed by the other device.Show media files stored in your deviceTo select images and videos stored in your device, andshow them in another home network device, such as acompatible TV, do the following:1 In Gallery, select an image or a video clip.2 Select Options > Show via home network.
