Make calls94To call in the standby mode, press the speed dial key and .Voice dialingYour device supports enhanced voice commands. Enhancedvoice commands are not dependent on the speaker’s voice,so the user does not record voice tags in advance. Instead,the device creates a voice tag for the entries in contacts,and compares the spoken voice tag to it. The voice recognitionin the device adapts to the main user’s voice to recognizethe voice commands better.The voice tag for a contact is the name or nickname thatis saved on the contact card. To listen to the synthesizedvoice tag, open a contact card, and select Options > Playvoice tag.Make a call with a voice tagNote: Using voice tags may be difficult in anoisy environment or during an emergency, soyou should not rely solely upon voice dialing inall circumstances.When you use voice dialing, the loudspeaker is in use.Hold the device at a short distance away when you saythe voice tag.1 To start voice dialing, in the standby mode, press andhold the right selection key. If a compatible headsetwith the headset key is attached, press and hold theheadset key to start voice dialing.2 A short tone is played, and Speak now is displayed.Say clearly the name or nickname that is saved onthe contact card.3 The device plays a synthesized voice tag for the recognizedcontact in the selected device language, and displaysthe name and number. After a timeout of 2.5 seconds,the device dials the number.If the recognized contact was not correct, selectNext to view a list of other matches or Quit tocancel voice dialing.If several numbers are saved under the name, the deviceselects the default number if it has been set. Otherwise thedevice selects the first available number of the following:Mobile, Mobile (home), Mobile (work), Telephone, Tel.(home), and Tel. (work).Answer or decline a callTo answer the call, press , or open the slide.To mute the ringing tone when a call comes in,select Silence.If you do not want to answer a call, press . If youhave activated the Tools > Settings > Phone > Callforward > Voice calls > If busy function to forwardcalls, declining an incoming call also forwards the call.See "Call forwarding," p. 114.
