Personalize your device77In the tones list, the Download sounds link (network service)opens a list of bookmarks. You can select a bookmark andstart connection to a web page to download more tones.If you want the caller’s name to be spoken when your devicerings, select Options > Customize, and set Say caller'sname to On. The caller’s name must be saved in Contacts.To create a new profile, select Options > Create new.Offline profileThe Offline profile lets you use the device withoutconnecting to the wireless network. When you activatethe Offline profile, the connection to the wireless networkis turned off, as indicated by in the signal strengthindicator area. All wireless RF signals to and from thedevice are prevented. If you try to send messages, theyare placed in the outbox to be sent later.When the Offline profile is active, you can use your devicewithout a (U)SIM card.Important: In the offline profile you cannot makeor receive any calls, or use other features that requirecellular network coverage. Calls may still be possibleto the official emergency number programmed intoyour device. To make calls, you must first activatethe phone function by changing profiles. If thedevice has been locked, enter the lock code.When you have activated the Offline profile, you can stilluse the WLAN, for example, to read your e-mail or browseon the internet. Remember to comply with any applicablesafety requirements when establishing and using a WLANconnection. See "Wireless LAN," p. 25. You can also useBluetooth connectivity while in the Offline profile. See"Bluetooth connectivity," p. 27.To leave the Offline profile, press the power key, and selectanother profile. The device re-enables wireless transmissions(providing there is sufficient signal strength).3-D tonesPress , and select Tools > 3-D tones. With 3-D tonesyou can enable three-dimensional sound effects for ringingtones. Not all ringing tones support 3-D effects.To enable the 3-D effects, select 3-D ringing tone effects >On. To change the ringing tone, select Ringing tone andthe desired ringing tone.To change the 3–D effect that is applied to the ringing tone,select Sound trajectory and the desired effect. To modifythe effect, select from the following settings:Trajectory speed—Scroll left or right to adjust the speedat which sound moves from one direction to another.This setting is not available for all ringing tones.Reverberation—Select the type of echo.
