N OMADIX AG-2000 W ™ / AG-2000 WA ™System Administration 153Deleting an ARP Table Entry {ARP Delete}ARP (Address Resolution Protocol) is used to dynamically bind a high level IPaddress to a low level physical hardware (MAC) address. ARP is limited to a singlephysical network that supports hardware broadcasting. This procedure shows youhow to delete an ARP table entry.1. From the Web Management Interface, click on System, then ARP Delete.The Delete ARP Table Entries screen appears:2. Enter the IP address of the entry you want to delete.3. Click on the Delete button to delete this entry, or click on the Reset button if youwant to reset the “IP Address” value to its blank state.
