N OMADIX AG-2000 W ™ / AG-2000 WA ™Installing the AG-2000w 39Installation WorkflowThis Installation Workflow illustrates the steps that are required to install andconfigure the AG-2000w successfully. Review this flowchart before attempting toinstall the AG-2000w on the customer’s network.Place the AG-2000w on a flat and stable work surface and connect the power cord.Start a Telnet session to communicate with the AG-2000w via the product’sIP address (172.30.30.172) or its default DHCP address.Log in to the Command Line Interface.Establish your AG-2000w’s start-up configuration settings.NetworkConnect the AG-2000w to a “live” network.Export your configuration settings to an archive file.Log in to the AG-2000w and use the graphical Web Management Interface(WMI) to configure the product's features. You have now established a basicconfiguration for the AG-2000w that enables "Plug and Play" Internetconnectivity.When prompted, accept to the Nomadix End User License Agreement (EULA). You mustaccept the EULA before the AG-2000w can connect with the Nomadix License Key Server.When the key is successfully received from the server, your AG-2000w will reboot.
