N OMADIX AG-2000 W ™ / AG-2000 WA ™90 System AdministrationManaging the System and Billing Log Options {Logging}System logging creates log files and error messages generated at the system level.AAA logging creates activity log files for the AAA (Authorization, Authentication,and Accounting) functions. You can enable either of these options.1. From the Web Management Interface, click on Configuration, then Logging.The Log Settings screen appears:2. If required, click on the check box for System Log to enable system logging.When system logging is enabled, the standard SYSLOG protocol (UDP) is usedto send all message logs generated by the AG-2000w to the specified SYSLOGserver.3. Enter a unique number (between 0 and 7) in the System Log Number field. ThisID number is assigned to the System Log Server.4. Enter a valid IP address in the System Log Server IP field.5. If required, repeat Steps 2 through 4 for the AAA Log feature.6. Click on the Submit button to save your changes, or click on the Reset button ifyou want to reset all the values to their previous state.When logging is enabled, log files and error messages are sent to these serversfor future retrieval. To see sample reports, go to “Sample SYSLOG Report” onpage 198 and “Sample AAA Log” on page 197.Although the AAA and billing logs can go to the same server, werecommend that they have their own unique server ID number assigned(between 0 and 7). When managing multiple properties, the propertiesare identified in the log files by their IP addresses.
