N OMADIX AG-2000 W ™ / AG-2000 WA ™62 System AdministrationUsing a Telnet ClientThere are many Telnet clients that you can use to connect with the AG-2000w. UsingTelnet provides a simple terminal emulation that allows you to see and interact withthe AG-2000w’s Command Line Interface.As with any remote connection, the network interface IP address for the AG-2000wmust be established (you did this during the installation process).Logging InTo access the AG-2000w’s Web Management Interface, use the Manager or Operatorlogin user name and password you defined during the installation process (refer to“Assigning Login User Names and Passwords” on page 48).About Your Product LicenseSome features included in this chapter will not be available to you unless you havepurchased the appropriate product license from Nomadix. In this case, the followingstatement will appear either immediately below the section heading or when thefeature is mentioned in the body text:Your product license may not support this feature.You can upgrade your product license at any time.User names and passwords are case-sensitive.
