AG 5500System Administration 91Defining IPSec Tunnel Settings {IPSec}From the Web Management Interface, click on Configuration, then IPSec. (You can alsoaccess IPSec from the CLI by going to Configuration->IPSec to configure settings, andNetwork Info->IPSec to view IPSec Tunnel status.)The IPSEC Tunnel Settings screen appears:To enable this feature, click on the Enable IPSEC check box.Enable/disable with checkbox but requires a reboot.Click on Add button in the Peers and Security Policy (SP) tables to add an entry.Peer IP addresses in Peers and SP tables are links to the configured policies.
