AG 5500System Administration 77Setting Up Bandwidth Management {Bandwidth Management}The AG 5500 allows system administrators to manage the bandwidth for subscribers, definedin Kbps (Kilobits per seconds) for both upstream and downstream data transmissions. With theICC feature enabled, subscribers can increase or decrease their own bandwidth dynamically(by the minute, or on an hourly, daily, weekly, or monthly basis), and also adjust the pricingplan for their service.1. From the Web Management Interface, click on Configuration, then BandwidthManagement.The Bandwidth Management screen appears:2. If required, click the check box for Bandwidth Management Enabled.3. If you enabled Bandwidth Management, enter the uplink and downlink speeds (in Kbps)in the appropriate fields.4. If you made any changes to the settings on this screen, you must click the check box forReboot after changes are saved? (the AG 5500 must be rebooted).5. Click on the Submit button to save your changes and reboot the system, or click on theReset button if you want to reset all the values to their previous state.Setting the uplink or downlink speeds to anything greater than 100,000 Kbps ismeaningless, because communication with the AG 5500 is established at 100Mbps (100,000 Kbps).
