NordicTrack S22i User Manual

Also see for Commercial S22i Studio Cycle: User manual User manual User manual User manual User manual

117. Look under the Console Support (8) and identifythe Upper Wire (123), which has a larger con-nector than the Extension Wire (124).Connect the Upper Wire (123) to the Lower Wire(122) extending from the Handlebar Post (7).Then, insert the connectors on both Wires intothe Handlebar Post.Next, connect the Extension Wire (124) to theControl Wire (125) extending from the Handlebar(97). Then, insert the connectors on both Wiresinto the Handlebar.879712212512478. Have a second person hold the Console (10)near the Console Bracket (11). Connect theUpper Wire (123) and the Extension Wire (124)to the matching wires (E) on the back of theConsole. Press the Wire Protector (110) aroundthe wires in the location shown.Next, insert the connectors into the ConsoleSupport (8), and then press the Wire Protector(110) into the Console Support. Tip: It maybe helpful to insert the connectors into theConsole Support one at a time.Tip: Avoid pinching the wires. If necessary,adjust the tilt of the Console Bracket (11) tomake this step easier. Attach the Console (10)to the Console Bracket with four M4 x 12mmMachine Screws (102); start all the MachineScrews, and then tighten them.8123Avoid pinchingthe wires102118E10 102123110124