NordicTrack S22i User Manual

Also see for Commercial S22i Studio Cycle: User manual User manual User manual User manual User manual

267. Calibrate the incline system.To calibrate the incline system, touch Maintenance,touch Calibrate Incline, and then touch Begin. Theframe will automatically rise to the maximum inclinelevel, lower to the minimum incline level, and thenreturn to the starting position. This will calibratethe incline system. When the incline system iscalibrated, touch Finish.IMPORTANT: Keep pets, feet, and other objectsaway from the studio cycle while the inclinesystem is calibrating.8. Exit the settings main menu.If you are in a settings menu, touch the backbutton. Then, touch the close button (x symbol) toexit the settings main menu.HOW TO CONNECT TO A WIRELESS NETWORKTo use iFit workouts and to use several other featuresof the console, the console must be connected to awireless network.1. Select the main menu.First, turn on the console (see HOW TO TURN ONTHE CONSOLE on page 18). Note: It may takea few moments for the console to be ready for use.Next, select the main menu (Home button). Whenyou turn on the console, the main menu will appearon the screen after the console boots up. If youare in a workout, touch the screen and follow theprompts to end the workout and return to the mainmenu. If you are in the settings menus, touch theback button (arrow symbol) and then touch theclose button (x symbol) to return to the main menu.2. Select the wireless network menu.Touch the menu button (three horizontal linessymbol), and then touch Wi-Fi to select the wire-less network menu.3. Enable Wi-Fi.Make sure that Wi-Fi ® is enabled. If it is notenabled, touch the Wi-Fi toggle to enable it.4. Set up and manage a wireless networkconnection.When Wi-Fi is enabled, the screen will show alist of available networks. Note: It may take a fewmoments for the list of wireless networks to appear.Note: You must have your own wireless networkand an 802.11b/g/n router with SSID broadcastenabled (hidden networks are not supported).When a list of networks appears, touch the desirednetwork. Note: You will need to know your networkname (SSID). If your network has a password, youwill also need to know the password.Follow the prompts on the screen to enter yourpassword and connect to the selected wirelessnetwork. (To use the keyboard, see HOW TO USETHE TOUCH SCREEN on page 18.)When the console is connected to your wirelessnetwork, a checkmark will appear next to thewireless network name.If you are having problems connecting to anencrypted network, make sure that your passwordis correct. Note: Passwords are case-sensitive.Note: The console supports unsecured andsecured (WEP, WPA™, and WPA2™) encryption.A broadband connection is recommended; perfor-mance depends on connection speed.Note: If you have questions after followingthese instructions, go to support.iFit.com forassistance.5. Exit the wireless network menu.To exit the wireless network menu, touch the backbutton (arrow symbol).