PICO Toμch Controller10www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.Important Disposable Component Safety InformationAll Nordson EFD disposable components, including syringe barrels, cartridges, pistons, tip caps, end caps,and dispense tips, are precision engineered for one-time use. Attempting to clean and re-use components willcompromise dispensing accuracy and may increase the risk of personal injury.Always wear appropriate protective equipment and clothing suitable for your dispensing application and adhere tothe following guidelines:• Do not heat syringe barrels or cartridges to a temperature greater than 38° C (100° F).• Dispose of components according to local regulations after one-time use.• Do not clean components with strong solvents (MEK, acetone, THF, etc.).• Clean cartridge retainer systems and barrel loaders with mild detergents only.• To prevent fluid waste, use Nordson EFD SmoothFlow™ pistons.Action in the Event of a MalfunctionIf a system or any equipment in a system malfunctions, shut off the system immediately and perform the followingsteps:1. Disconnect and lock out system electrical power. If using hydraulic and pneumatic shutoff valves, close andrelieve pressure.2. For Nordson EFD air-powered dispensers, remove the syringe barrel from the adapter assembly. For NordsonEFD electro-mechanical dispensers, slowly unscrew the barrel retainer and remove the barrel from the actuator.3. Identify the reason for the malfunction and correct it before restarting the system.DisposalDispose of equipment and materials used in operation and servicing according to local codes.Nordson EFD Product Safety Statement (continued)