Nordson EFD PICO Touch Operating Manual

Contents

Nordson EFD PICO Touch Operating Manual Manual pdf 33 page image

PICO Toμch Controller33www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.Switching the Heater Control (MODE) toOn, Off, or RemoteFollow this procedure to switch the heater control on or off or tochange the heater mode to remote operation.1. Press the HEATERS icon ( ).2. Press the button for the desired heater mode.• Off: Heater control switches OFF.• On: Heater control switches ON.• Remote: Heater control follows a remote input signal (refer to"Input / Output Port Pin Descriptions" on page 46 toconnect inputs / outputs).3. Press HOME to save the setting and return to the HOME screen.Setup and Programming Procedures (continued)ABOUT CALENDARCLOCK SET OK (check) LANGUAGE RAMPBackspace Cancel HEATERS LOCKOUTS SETTINGSLCD SETTINGS Decimal Point HOME PASSWORDS SYSTEMCYCLE Decrement Increment PURGE VALVEViewing or Changing the Valve HeaterTemperature / Temperature SetpointFollow this procedure to view or change the valve heater setpointtemperature or to view the actual temperature of the valve heater.1. Press the HEATERS icon ( ).2. Press SETTING and enter the desired temperature setpoint on thenumeric keypad.NOTES:• The actual temperature of the heater is displayed on thetouchscreen next to ACTUAL.• To change how temperature units are displayed, refer to "Viewingor Changing System Settings" on page 35.3. Press OK (check) > HOME to save the setting and return to theHOME screen.