Nortel 1000 Configuration Manual

Also see for 1000 Con?guration guide: Brochure Reference User manual Overview User guide

Contents

Chapter 1 Voice Office Configuration RequirementsSpecifying a Source for Phone IP-to-DN Mappings12 Voice Office Application Suite Configuration Guide3 Select the source to be used to map extensions (DNs) to IP addresses.4 If you selected a call server, complete these fields for the signaling server(s).For Communication Server release 4.0 and 4.5, you specify just onesignaling server (which automatically obtains information from the othersignaling server). For sites using two signaling servers andCommunication Server release 3, you must specify both signaling servers.a. The signaling server IP address and Telnet port.Typical sites have one signaling server deployed. However, largersites might have a primary and secondary signaling server or twosignaling servers that are load balanced.b. The customer number (used by the call server if it is configured formore than one customer). Customer Number defaults to “0”.c. The credentials for the call server and signaling server.5 If you selected CSV, complete these fields: