120 Chapter 4 IP Flow Information Export (IPFIX)IPFIX configuration using the Java Device ManagerThis section describes the configuration and management of IPFIXfunctionality using the Java Device Manager.Global IPFIX configurationIPFIX functionality can be globally enabled or disabled from the Java DeviceManager. By default, IPFIX is disabled and must be enabled before it willstart to collect flow information. This section contains the procedures forenabling and disabling IPFIX on a switch.Global configuration using the JDMTo enable or disable IPFIX using the JDM, follow this procedure:Step Action1 Select Serviceability > IPFIX from the Device Manager menu.The IPFIX dialog opens with the Global tab selected. This screenis illustrated below.IPFIX dialog - Global tab2 On the Global tab, select the operational state of IPFIX functionalityfrom the State area.3 Click Apply.—End—Configuring IPFIX flowsOnce IPFIX has been enabled on a switch, the ports IPFIX will monitor mustbe configured. Configuration of flow information sources can be performedin the Java Device Manager.Configuring flows using the JDMFlow configuration using the JDM is performed on the Exporters and Portstab of the IPFIX dialog.To configure IPFIX flows in the JDM, perform the following procedure:Nortel Ethernet Routing Switch 5500 SeriesConfiguration - System MonitoringNN47200-505 03.01 Standard5.1 27 August 2007Copyright © 2005 - 2007, Nortel Networks.
