Nortel 5510 Configuration

Also see for 5510: Installation Specifications Engineering guide

Contents

IPFIX configuration using the Java Device Manager 125Ports tab fieldsField DescriptionId The individual port on which the IPFIX parameters arebeing configured. Ports are itemized in the format Unit/ Port.Flush Note: Although this field is displayed on a per port basis,flushing is only supported on a per unit basis in SoftwareRelease 5.0.Determines the flushing action to take on the port.Flushing the port of data involves deleting all previouslygathered information on that port. This field providesthree options:• none - The port data is not flushed.• flush - The port data is flushed; deleting it fromswitch memory.• exportAndFlush - The port data is exported to aconfigured collector and the data is then flushed.AllTraffic Determines whether IPFIX data is collected on this port.This field provides two options:• enable - IPFIX data is collected.• disable - IPFIX data is not collected.If a single port is selected, packets are sampled every second. Ifmultiple ports are selected, sampling is performed on every port thathas a link in succession. Sampling rotates between the selectedports with each port having a sampling window of 1 second. Forexample, if 10 ports were selected on a switch, each port wouldbe sampled every 10 seconds.4 Click Apply.—End—Graphing Exporter StatisticsTo view IPFIX exporter statistics, use the following procedure:Step Action1 Select Serviceability > IPFIX from the Device Manager menu. TheIPFIX dialog will open with the Global tab selected.2 Select the Collectors tab.Nortel Ethernet Routing Switch 5500 SeriesConfiguration - System MonitoringNN47200-505 03.01 Standard5.1 27 August 2007Copyright © 2005 - 2007, Nortel Networks.