Using the BayStack 350 Series 10/100 Autosense Switch3-36 893-00992-EPort ConfigurationThe Port Configuration screen (see Figure 3-15 and Figure 3-16) allows you toconfigure a specific switch port or all switch ports. You can set the switch ports toautonegotiate for the highest available speed of the connected station, or you canset the speed for selected switch ports.Choose Port Configuration (or press p) from the Switch Configuration Menuscreen to open the Port Configuration screen.Figure 3-15. Model 350F-HD Port Configuration screen (1 of 2)V1 to V8 Indicates the VLAN names for VLAN V1 to VLAN V8.Default All ports configured in VLAN V1Range Enabled [ x ], Disabled [ ]1 MultiLink trunking is available for BayStack 350 Series switches using software release version V2.0 (or later). Earlierversion BayStack 350 Series switches do not display this field in the VLAN Configuration screens.Table 3-12. VLAN Configuration screen fields(continued)Field DescriptionPort ConfigurationPort Trunk Status Link Auto Negotiation Speed Duplex---- ----- ------------ ---- ---------------- -----------------1 [ Enabled ] Up [ Enabled ] [ 100Mbs / Half ]2 [ Enabled ] Up [ Enabled ] [ 100Mbs / Half ]3 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]4 [ Enabled ] Down [ Disabled ] [ 100Mbs / Half ]5 [ Enabled ] Up [ Enabled ] [ 10Mbs / Full ]6 S1 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]7 S1 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]8 [ Enabled ] Up [ Enabled ] [ 10Mbs / Full ]9 S1 [ Enabled ] Up [ Disabled ] [ 100Mbs / Full ]10 [ Enabled ] Down [ Enabled ] [ 100Mbs / Full ]11 [ Enabled ] Down [ Enabled ] [ 100Mbs / Full ]12 [ Enabled ] Down [ Disabled ] [ 100Mbs / Half ]More...Press Ctrl-N to display choices for ports 13-26.Use space bar to display choices, press or to select choice.Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
