Using the Console Interface893-00992-E 3-79Display Event LogThe Event Log screen (Figure 3-34) provides the following information:• Software download: Indicates the new software version.• Authentication failure: Indicates any attempted SNMP get or set access thatspecified an invalid community string.• TELNET session status: Indicates various TELNET events. (For details onconfiguring this feature, see “TELNET Configuration” on page 3-68.)• Operational exception: Indicates that the microprocessor has received anexception at the specified vector number.Choose Display Event Log from the main menu to open the Event Log screen.Figure 3-34. Event Log screenNote: This screen does not refresh dynamically to show new entries. Torefresh the screen, press [Ctrl]+P.Event LogEntry Number: 4 sysUpTime: 00:14:36 Reset Count: 2Connection logout, IP address: 38.227.40.8, access mode: no security.Entry Number: 3 sysUpTime: 00:13:35 Reset Count: 2Connection logout, IP address: 38.227.40.8, access mode: no security.Entry Number: 2 sysUpTime: 00:00:53 Reset Count: 2Successful connection from IP address: 38.227.40.8, access mode: no security.Entry Number: 1 sysUpTime: 00:00:00 Reset Count: 1Software downloaded to BayStack Model 350T HW:RevC FW:V1.00 SW:V1.00.Press Ctrl-P to see previous display. Press Ctrl-N to see more entries.Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
