Using the Console Interface893-00992-E 3-45Trunk UtilizationThe Trunk Utilization screen (Figure 3-20 and Figure 3-21) allows you to monitorthe percentage of bandwidth used by configured trunk members. You can choosethe type of traffic to monitor.Figure 3-20 shows an example of bandwidth utilization rates for the trunk memberports configured in inter-switch trunks I1, I2, I3, and I4. To display utilization forserver trunks S1 to S4, press [Ctrl]+N.Figure 3-21 shows an example of bandwidth utilization rates for the trunk memberports configured in server trunk S1.Choose Trunk Utilization (or press u) from the MultiLink Trunk ConfigurationMenu screen to open the Trunk Utilization screen.Figure 3-20. Trunk Utilization screen (1 of 2)Trunk UtilizationTrunk Traffic Type Port Last 5 Minutes Last 30 Minutes Last Hour----- ------------- ---- -------------- --------------- ---------I1 [ Rx and Tx ] 25 90.0% 70.0% 80.0%26 20.0% 50.0% 100.0%I2 [ Rx and Tx ] 13 15.0% 45.0% 30.0%14 60.0% 10.0% 20.0%I3 [ Rx and Tx ] 19 30.0% 90.0% 80.0%20 20.0% 10.0% 50.0%I4 [ Rx and Tx ] 22 85.0% 35.0% 50.0%23 90.0% 80.0% 70.0%More...Press Ctrl-N to display utilization for trunks S1-S4.Use space bar to display choices, press or to select choice.Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
