Installing and Starting the AP Manager203282-B 4-334. Click Next.The Subnet or Gateway dialog box opens.5. Enter the new address.6. Click Next.A confirmation dialog box opens.7. Click Finish if the information is correct.The Configuration Completion dialog box opens (Figure 4-16) showing thatthe changes are being processed.8. Click OK when the process is complete.Changing the PasswordTo change the password of the access point:1. Choose Configure > Group.2. Select the group you want to configure.The Multiple Configuration Wizard dialog box (Figure 4-15) opens.3. Click Password.4. Click Next.The password dialog box opens.5. Enter the new password and retype the same password.6. Click Next.A confirmation dialog box opens.7. Click Finish if the information is correct.The Configuration Completion dialog box opens (Figure 4-16) showing thatthe changes are being processed.8. Click OK when the process is complete.